Boli Toys Electric 4WD Discussion Room

[br4v13]

 
   Many racer  Indonesia I think can help you. Many racer in Indonesia are playing Boli. They also can talk in english very well  

   p/s: Boli are same patent with Tamiya TL-01

 

betul sekali Calsonic..... di Indonesia banyak yg main boli, terutama RC~er yang baru maen EP biasanya belajarnya pake Boli, Meiji, dll dulu...... kalo udah canggih baru maen EP and nge-drift......
 end forum ini juga forum Indonesia....., sebaiknya kalo Rc~er yg ingin sharing sikit-sikit bisa lah pake bahasa Indonesia ato melayu....... pasti awak dapat banyak cakap dengan mereka......

[toe_cutter]

Just got my email alert

1. You might want to remove the steering servo saver from the servo itself and make sure both the saver and the servo are centered. If they are connected check:
2. Make sure all steering joints are connected. Make sure that all the screws on the servo saver and the steering knuckles are in place.

Dont know what that has too do with giving my car more force, but the steering all seems ok

you mean while put on stand and apply the trotttle on, front left not turn while others turns ?
you may check dogbone brother, boli dogbone is weak its a chromed brass, plastic ball end covering the cross-pin
you might use use item 53418 TL-01 Universal shaft for replacement, far more stronger and more efficient power delivery

Well, it turns when i apply throttle, but if i turn the two back wheels manually with my hand (might not be so good on the motor but..) the front left hardly turns at all,  maybe a ½cm too 1cm each time i turn the back wheels again.

Also i talked to the store i bought it from, they said that they would replace it
But.. i crashed into a metal piece sticking out from a building and made a hole in the chassi Going to call them back and ask if i only have to take the main part, since its so big i dont like carrying it on the subway.

Thanks anyway for the replies! Much appreciated

[Ziddan Sr.]

Hi everyone!

First, i dont speak malaysian or korean, only swedish or english.
So if you  dont understand me, well.. im out of luck then

I bought this (swedish text) rc car yesterday, which i think is a Boli one, tho it says Haiboxing on the package. Tried it out today outside for 15minutes. When i got back in I put it up on a stand and drove forward.
The front left wheel was hardly turning at all! So i took off the chassi's and turned both back wheels, nothing on the front left.
Ive checked for gravel and such and found none.

Any ideas?

My guess is that the differential is broken, but it is encapsuled and nothing can get too it.

Any help is greatly appreciated! And i hope someone understands english

differential should be ok, its metal bevel gear diff a'la tamiya (though not as precisely as its original, should be long way to go broken)
only if the cover screw is loose and it will stripped off immediately,

[Ziddan Sr.]

Hi everyone!

First, i dont speak malaysian or korean, only swedish or english.
So if you  dont understand me, well.. im out of luck then

I bought this (swedish text) rc car yesterday, which i think is a Boli one, tho it says Haiboxing on the package. Tried it out today outside for 15minutes. When i got back in I put it up on a stand and drove forward.
The front left wheel was hardly turning at all! So i took off the chassi's and turned both back wheels, nothing on the front left.
Ive checked for gravel and such and found none.

Any ideas?

My guess is that the differential is broken, but it is encapsuled and nothing can get too it.

Any help is greatly appreciated! And i hope someone understands english

you mean while put on stand and apply the trotttle on, front left not turn while others turns ?
you may check dogbone brother, boli dogbone is weak its a chromed brass, plastic ball end covering the cross-pin
you might use use item 53418 TL-01 Universal shaft for replacement, far more stronger and more efficient power delivery,

[Calsonic®]

  Thank's fabolousRC  

[fabolousRC]

 Waduh kenapa diam aja di sini? bagaimana Boli.... Saya dengar, rame juara Boli. Pertandingan juga banyak tertumpu pada Boli sih.  

   Ada yang bisa modified Boli atau Former atau Meiji on-road jadi off-road? Main bashing..  

  p/s:  Selamat Berpuasa kepada Umat Islam yang berada di Indonesia.....

   

very simple...just get suspension arms for tamiya Baja King/Champ plus the body and you'll be offroading soon. But...even with the stock suspension and rally car body you should be bashing already...except the front bumper...you need to find somebody who has stock TL01 bumpers cuz otherwize you get stuck on the jumps...

[fabolousRC]

Hi everyone!

First, i dont speak malaysian or korean, only swedish or english.
So if you  dont understand me, well.. im out of luck then

I bought this (swedish text) rc car yesterday, which i think is a Boli one, tho it says Haiboxing on the package. Tried it out today outside for 15minutes. When i got back in I put it up on a stand and drove forward.
The front left wheel was hardly turning at all! So i took off the chassi's and turned both back wheels, nothing on the front left.
Ive checked for gravel and such and found none.

Any ideas?

My guess is that the differential is broken, but it is encapsuled and nothing can get too it.

Any help is greatly appreciated! And i hope someone understands english

1. You might want to remove the steering servo saver from the servo itself and make sure both the saver and the servo are centered. If they are connected check:
2. Make sure all steering joints are connected. Make sure that all the screws on the servo saver and the steering knuckles are in place.

[Calsonic®]

   
   Many racer  Indonesia I think can help you. Many racer in Indonesia are playing Boli. They also can talk in english very well  

   p/s: Boli are same patent with Tamiya TL-01

[toe_cutter]

Hi everyone!

First, i dont speak malaysian or korean, only swedish or english.
So if you  dont understand me, well.. im out of luck then

I bought this (swedish text) rc car yesterday, which i think is a Boli one, tho it says Haiboxing on the package. Tried it out today outside for 15minutes. When i got back in I put it up on a stand and drove forward.
The front left wheel was hardly turning at all! So i took off the chassi's and turned both back wheels, nothing on the front left.
Ive checked for gravel and such and found none.

Any ideas?

My guess is that the differential is broken, but it is encapsuled and nothing can get too it.

Any help is greatly appreciated! And i hope someone understands english

[Calsonic®]

boli tuh ape ke bendenye...tak paham

 Assalamualaikum bang...... Boli ni r/c car ler.  Macam TL-01 gak. Kalau nak tau lebih lanjut, cuba baca dari awal sampai akhir topic ni.  

boli tuh ape ke bendenye...tak paham

[Calsonic®]

 Gue memang asyik perhatikan aja buletin2 mengenai Boli & seangkatan dengannya sih...

waduh waduh calsonic........sudah kembali kepada boli nampaknya.....

[Calsonic®]

  Waduh kenapa diam aja di sini? bagaimana Boli.... Saya dengar, rame juara Boli. Pertandingan juga banyak tertumpu pada Boli sih.  

   Ada yang bisa modified Boli atau Former atau Meiji on-road jadi off-road? Main bashing..  

  p/s:  Selamat Berpuasa kepada Umat Islam yang berada di Indonesia.....

   

[Hornydevil]

alooo...... mau nanya.... kalo boli / mj / tl 01 tuh masih banyak peminatnya ga sih? atau semua dah ke casis touring? kesian donk yang udah nyemplung di boli ampe juta2an hahaha....

[Ziddan Sr.]

that mean di indonesia paling banyak tamiya la? memang clever tamiya carik market. how about other product parts like hpi, yokomo, xray, etc? for me tamiya pruduct di malaysia expensive sikit.

 

one word also : many, xray more mahal, Losi also many
how come expensive lah? u can arrange yr friend direct buy from japan should be more cheaper in delivery fee if one package delivery contents lots of parts, gets more cheaper if u hav commercial airliner (pilot etc.) colleagues frequently flies to Narita..
dont forget TC3 so many also bro..

so far, wat i know dat in some area people have weekly club race on their well prepared track, pulomas team also have plan to improve the circuit usually dey have monthly race,
don't ask about the twin ring senayan, its always bunch of serious racer there (not mention use 1/8 GP mostly),  
its clear dat intense activity will increase the spare part needs and supply..  

low-grade-cheap (but upgradeable) EP like boli and their friend meiji, is good successor of QD in craze of rc car here,

race track design also somehow push many QDers take a step to EP afterwards,
though boli need big upgrade to deal with the performance of chassis brands u mention above, boli is decent car for fast technical track with lots fast sweepers, chicane, hairclip, where this like a jungle for QD but home for EP to nicely live, coz u know lah bro QD chassis lack of traction and cornering speed n stability,

here QD far better for straight track drag race that required less skills but might need more cash than runs EP..

[TaWiLz™]

 

that mean di indonesia paling banyak tamiya la? memang clever tamiya carik market. how about other product parts like hpi, yokomo, xray, etc? for me tamiya pruduct di malaysia expensive sikit.

 

[Ziddan Sr.]

sudah merata mencari susah.. di indonesia mungkin la senang dapat, kerna ramai yang memakainya..

yap, anda benar calsonic, kerana banyak yg pake boli n meiji based on TL-01 design, so many upcoming hop-up part can be used from tamiya hop-up/spare part line-up, tamiya is really clever clever company..
ini sayangnya tdk bisa diikuti oleh smartech, they die slowly..., then others shift to TC3, XXX-S, or 415 more upgradeable..

[Calsonic®]

one word : easy

sudah merata mencari susah.. di indonesia mungkin la senang dapat, kerna ramai yang memakainya..

[Bagusth]

Om Revpa ..... bisa ndak lihat gambar chargernya ?
Chargernya pakai arus AC atau DC .....