Your Ad Here

~! SERVER UNDER UPGRADING AND MAINTENANCE !~
Malaysian R/C Community Board

Welcome, Guest. Please login or register.
24 May 2012, 07:54:49 AM

Login with username, password and session length
New mods and features have been added. Please do browse around.

HomeHome HelpHelp SearchSearch CalendarCalendar DonationsDonations GalleryGallery LoginLogin RegisterRegister
+  Malaysian R/C Community Board
|-+  General Category
| |-+  General Discussion (Moderators: X-Mod, SamDol®, shahrc)
| | |-+  Need helps bro.. Mid Range Needle settings		 « previous next »
Pages: [1] Go Down Print
Author Topic: Need helps bro.. Mid Range Needle settings  (Read 514 times)
« Reply #4 on: 08 February 2007, 11:34:57 AM »
Offline xplodx2001
Intermediate
***
Posts: 101
Race till we can
thanks jameskhoo.. my problems solves  Wink
Logged
hyper7 pbs
hyper 8
mp7.5
losi micro t
ntc3
t/t ts-4n
« Reply #3 on: 05 February 2007, 05:35:07 PM »
Offline jameskhoo
RC Maniac
****
Posts: 280
Hungry like a wolf
 Gender: Male
Quote from: xplodx2001 on 23 January 2007, 04:35:44 PM
saya menggunakan hyper 7 pbs dan mendapatkannya secara 2nd.
bila saya check mid range needle..ianya bukan lg dlm keadaan asal.. sy cuba dapatkan manual enjin dari ofna..
yang ternyatanya settings asal tu dlm keadaan flush.
so macamana saya nak kembalikan semula settings tu dlm keadaan asalnya ?
berapa turns yg perlu saya buat ?
adakah settings tersebut boleh menjejaskan performance buggy saya ?

harap bro2 semua dapat membantu saya..

You can go to web page www.rbproducts.com.to check out how to adjust the engine,use the info has baseline.
Yes,you should not adjust the mid setting,it should be in flush position(turn it out till it flush,remember how many turn you turn out,then turn in the low end setting screw in to the same turn you just sdjust out the mid)
Hope this help.
cheers,happy racing
Logged
2006,
30/07 Gunung Lang EP A-main 5th
27/08 MNC Sock A-main 6th,Modify C-main 3rd

2007,
Rc planet 11th March,c-main 1st
Makro Fun Race 15th April Stock A-main 7,Modify A-main 1st & TQ
Ipoh Fun Race 3rd June Stock A-main 3rd(Faster single lap 18.389)

« Reply #2 on: 04 February 2007, 11:57:48 AM »
Offline xplodx2001
Intermediate
***
Posts: 101
Race till we can
thanks shahrc.. my problems solves (dapat manuals dari ofna) Cheesy
Logged
hyper7 pbs
hyper 8
mp7.5
losi micro t
ntc3
t/t ts-4n
« Reply #1 on: 03 February 2007, 11:42:32 PM »
Offline shahrc
Moderator
Intermediate
*****
Posts: 167
Sapa pulak drift malam² nih, bising laaa..
WWW
Saya bukan expert... tapi rasenye kalau GP nih standard setting bukan 2.5 turn ka? Dulu kalau saya ade masaalah tak bluh start ka apa ka always I saya pergi ke setting nih.
Logged
Webhosting Services
« on: 23 January 2007, 04:35:44 PM »
Offline xplodx2001
Intermediate
***
Posts: 101
Race till we can
saya menggunakan hyper 7 pbs dan mendapatkannya secara 2nd.
bila saya check mid range needle..ianya bukan lg dlm keadaan asal.. sy cuba dapatkan manual enjin dari ofna..
yang ternyatanya settings asal tu dlm keadaan flush.
so macamana saya nak kembalikan semula settings tu dlm keadaan asalnya ?
berapa turns yg perlu saya buat ?
adakah settings tersebut boleh menjejaskan performance buggy saya ?

harap bro2 semua dapat membantu saya..
Logged
hyper7 pbs
hyper 8
mp7.5
losi micro t
ntc3
t/t ts-4n
Pages: [1] Go Up Print 
« previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1 RC3 | SMF © 2001-2006, Lewis Media
SMFone design by A.M.A, ported to SMF 1.1 RC3 by Aäron.
Altered and Moded by Rosdi Bin Ahmad.
 Affiliate: Qd-race.com  |  Uptrend2u.com 		Valid XHTML 1.0! Valid CSS!
Page created in 0.661 seconds with 20 queries.






View Counter