Ratio. How to calculate it?

[Aqualung]

Hi all.

Here i attached a 'Power Panel' picture. Is alot of LHS sell this power panel? How much the price?

Or, anybody know/have a circuit diagram to fabricate/customize it? ( A good circuit diagram...mean the amp/voltage never get a glitch/drop...  

Thank for the advise...  

[rudy]

Ratio. How to calculate it?

1. Primary Ratio.
2. Internal Ratio.
3. Final Drive Ratio.

GP calculation is different than EP ?
If Ratio is higher so the speed or tourqe (pickup) will increase?

Thank you for the advise.

1.til now i also dunno wat it means
2.big pulley/bevel divide small pulley/bevel
3.spur divide pinion multiply with internal ratio
4.if ratio is higher(international r/c language) u get more speed

eg. final drive 6.0 (lower)
      final drive 5.9 (higher)

[Aqualung]

Minta tolong dgn moderator. Tolong delete topik ni. Dah dapat the answer. thank you.

[M_Syafiq]

Greetings

http://www.qd-race.com/forum/index.php?board=10;action=display;threadid=425

Thanks

[Aqualung]

Ratio. How to calculate it?

1. Primary Ratio.
2. Internal Ratio.
3. Final Drive Ratio.

GP calculation is different than EP ?
If Ratio is higher so the speed or tourqe (pickup) will increase?

Thank you for the advise.