kete ni nak beat nitro boleh tak ? .. rasenye direct drive lagi laju long top speed. tapi macam mane dengan conner dia .. boleh ambik conner laju tak .. ..
My bro ada order this pro kit. So he would like to know what is the best/recommended setup to get max traction out of the car. Damper setting, tyres, ride height and so on... . .
Boleh main ngan nitro 5port turbo tak ... pakai novak ss5800 mesti boleh beat punya .. conner handling macam mane compare Auldey V2. aku memang suka main pan car .. masalahnya tang conner je .. top speed memang power .. tayar boleh pakai yang standart tak like Sorex.. ?
ada orang cakap 1/12 lagi laju dari 1/10 .. betul ke ? why 1/12 lebih laju top speed compare 1/10 ( use novak bl ss5800 6 cell ) play in touring ..
Tyre is the most critical part for this car. In term of handling....easier compare to 1/12 pc.... I think much better than Audley 1/10. Kereta nie lebar 230mm. Wider is better!!!!!
Original tyre boleh bertahan tak sampai 10 pack batery for GP3300 with bL SS5800. Tapi kalau stock motor mungkin lama sikit kot. So, brother Rosdi kena ada stock part nie.
Next week donut tyre sampai kot...(rosdi input)
Yang lain tak ada masalah besar. Base on my friend, Azmi...only T-plate, diff ring and axle perlu ada spare part. tapi susah juga hendak rosak.
Don't worry part kereta nie tak banyak....kereta nie pro class...so, no hop up diperlukan....keluar box...pasang...janji ada body+ electronic eqp....jalan like pros.
Cuma ada satu accessories...diperlukan .....red dot for tyre additive...biasa le pan car...
Setting....selepas dipasang as per manual.....cuba dapatkan grip as much as you can for rear tyre......smooth throttle finger....sure you can fly like MS. role of thumb....for rough surface..... kurangkan side damper effect...ride height from 4mm to 6mm...tapi most of the time 6mm....bukan carpet maa.
Gear ratio..depend on the motor...basic maa...my ratio 82/18...this is base on CharlieS suggestion from Novak..contacted by e-mail
For me original 2 side damper too hard.....itu boleh di setting....kecik punya hal...
If we want to get the real feel of this car...we need big and prepared track like TT, Kelang to push this car to the limit....tight track...kurang syok sikitnye.....for me its really really fast with BL 5800 when compare to 9T motor in TC or & 7 cell in ss5800 in TC....some time just half throttle enough to keep up with 9T motor TC top speed.
This car sensitive to rough surface or any dust on the track.
I really like this car.....easy and very fast.....my dream come true.
Sorry, wheel base sama macam TC,....sebenarnya this one special order....mula cuba dapat 1/10 pan car CRC Pantoura...lambat sangat..RS10G....juga payah...RS10G production katanya ada lagi..tapi..utk Jepun je...so academy le...Thanks Rosdi.
Sebenarnye, saya ada group main Oval kat TT. Every Jumaat malam Sabtu. Just for fun. nothing serious. So banyak yang laju. level modified...banyak yg main custom made pan car semua 1/12. TC dalam 4-6 bijik....3-4 SS5800 and satu 19T motor. clik nie dah lama ...masuk lebih 2 tahun. Pan car 1/12 stockers sama laju je dgn SS5800 TC. Cuma handling je yg membezakannya. Cikalang nak laju lagi.....emm Pro10 le...direct drive..simple...light.. part tak banyak..murah....tapi keta nie utk racing je. Bukan for bashing...makna nye...atas prepared track je... not advise for others than that.
katanye keta nie handling lebih senang compare to 1/12 pan car. Speed...19T sama laju 10T kat TC. Tengah tunggu SS5800 hantar repare...nak letak kat SP3-x pro nie...
So, sekarang pakai BL Schulze 12.46e controller kat Evo 2, motor lehner 5300. System nie jauh lebih laju dari SS5800. Even, kalau SS5800 pakai tujuh cells pun.